BMW LED emblem indicators with white daytime running lights (DRL) 56 mm
These BMW LED emblem indicators with white Daytime Running Lights (DRL) are easy to mount (paste and/or screw mounting) on the spot where the BMW emblems are now. The set comes with a ‘photo’ manual and all mounting and connecting materials.
When mounted, the supplied emblems are placed on the BMW LED emblem indicators with (DRL).
The BMW LED emblem indicators with white Daytime Running Lights (DRL) can be applied to motorcycles with existing indicators in LED or light bulb.
The connecting cable is equipped with waterproof 3-way connectors so after assembly the fairing with LED emblem indicator can be easy removed.
You can connect the LED emblems with DRL in two different ways:
You can connect them directly to your motorbike’s wiring harness, using the connection kit provided.
Or use the special ezCAN/CANsmart cable to connect them to a HEX ezCAN or Denali CANsmart.
Connecting to the wiring harness:
If you use the direct connection to your wiring harness, the white daytime running lights will always light up at 100%.
Optionally, you can order the Switch type II or III switch along, then you can switch the white DRL LEDs on/off and in dim mode.
Connecting to Denali CANsmart or HEX ezCAN
Want more options? Then we recommend connecting the LED emblems with DRL, to a Denali CANsmart or HEX ezCAN.
These allow you to set up more advanced configurations. This allows you to:
* Set the intensity of the DRL (day/night)
* Using the wonder wheel on the handlebar (if present) to set the brightness the LED emblems.
* Set the intensity of the indicators (day/night)
* Adjust the colour of the DRL (white or orange)
* Activate the strobe function at 3x high beam
Connection to an ezCAN or CANsmart requires three empty channels (left, right and drl).
Already have a CANsmart or ezCAN but not enough channels?
Then order an extra ezCAN, which is cheaper than a CANsmart because no wiring harness is supplied as standard.
Do always order the special LED emblem wiring harness to make sure you can connect it to your controller that way.
It does not only look nice, but your indicators are also better visible from the side, which improves road safety. No adjustment on the CANbus system is required!
These BMW LED emblem indicators with white Daytime Running Lights (DRL) feature 30 high resolution LEDs and give a good and beautiful light output, watch out for cheap imitation!
These BMW LED emblem indicators with white Daytime Running Lights (DRL) are not approved for use on public roads in some countries and should not be used there!
Please check your local legislation.